PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
48
-
4.2.3.
Commands of the Configuration Mode
Only the user who has the root account or equivalent authorities can access to
the configuration mode. In the manager mode, the user cannot change the
existing configuration of the Gateway nor make a new configuration of the
Gateway.
The configuration mode can be divided into several kinds – the interface
Configuration mode, the Global Configuration mode and the VoIP
Configuration mode.
The prompt is indicated as “router(config)#” in the global configuration mode.
In the global configuration mode, the user can make any configuration
relating to the Gateway except the interface configuration. And in the
interface configuration mode, the user can make any configuration relating to
the interface – IP address configuration, WAN protocol configuration and so
on.
The prompt is indicates as “router(config-serial0)” in the interface configuration
mode.
4.2.3.1.
Global Configuration(config) Commands
Command
Description
Access-list
Creates the access-list. From #0 to #29 are covered by
the standard access-list, and from #30 to #59 are covered
by the extended access-list.
Accounting-list A configuration command to use the IP account.
Arp
Adds or deletes a certain Ethernet address in the ARP
table.
Bridge
Sets bridge related items.
Clock
Sets system time of the Gateway.
