PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
67
-
4.5.1.
HDLC Configuration
The HDLC mode is the transmission method of the frame layer that is used in the
packet data communication network. The WAN (serial) port set as the HDLC
mode is applied to the physical layer and the frame layer among OSI 7 layers.
In the HDLC mode, no virtual line is provided, and only one connection is
provided for each physical port. Therefore, logical interface cannot be used
in the HDLC mode. There is no standard specifications for the HDLC. The
PassFinder AP2520 router supports same specification as the HDLC of Cisco
Systems that is most widely used in the industry, and guarantees full
compatibility.
[Procedure]
Step
Operation
1
Enter into the interface configuration mode.
2
Give encapsulation protocol to the interface.
3
Move to the IP configuration mode.
4
Give an IP address to the interface.
5
Make the interface up.
6
Set other necessary optional parameters.
7
Check if “show” command has been properly set up.
8
(If necessary) use “debug” command to check if the router is normally
operating.
[Related Commands and Syntax]
z
configuration
Enters into the router configuration mode.
z
interface
{
Ethernet / serial
} { 0 / 1 }
Selects the interface to set up, and enters into the interface configuration
mode.
