PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
334
-
is address number “ 100” and a user want to connect with internal-line number
“ 300” subscriber using DID method, calling party user must generates the VoIP call using
called party address number “ 100300” .
z
In AP2520 VoIP equipment, if called party address “100300” is received from Internet, number
“300” address except prefix address “200” is transmitted to PBX side.
5.8.9.
E1 Configuration Example
Following command lists are simple configuration example.
In following example, digital E1 VoIP module is installed on slot0 of AP2520G/R VoIP equipment,
for digital E1 PSTN interface, clock is received from peer side, AP2520 is user side, and peer side
of AP2520 is network side configuration. For digital E1 PBX interface, PBX is user side, and
AP2520 is network side.
In this example, number “2000” is allocated as E1 interface. So, if called party address is
received from Internet through H.323 signaling procedure, E1 port is selected, except prefixed
address “2000”, number “1000” is transmitted to peer side via digital VoIP signaling interface.
! PRI controller configuration
!
controller e1 1/0
clock-source slave
channel-group timeslots 1-31
isdn protocol-emulate user
!
!
dial-peer voice 4 pots
destination-pattern 2000
port 1/0
!
5.8.10.
E1 Interface Debugging
Following commands are applicable for E1 interface debugging.
ap2520-A# debug rta ?
