PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
116
-
configuration location.
2.
NAT-list-number: Define any number between 0 and 7.
3.
Start-address/End Address/Mask: Define the start address and the end
address of NAT and the subnet masks for these addresses.
z
nat
<
nat-list-number
>
nat
inside-global
<
start-address
> <
end-address
>
<local-ip address >
1.
Creates a Nap pool for the outside global address in the global
configuration location.
2.
NAT-list-number: Define any number between 0 and 7.
3.
Start-address/End Address: Designate the start address and the end
address to use in the NAT.
4.
Local –IP-Address: When there is a subnet that uses a registered IP in the
local network, the user can register this subnet in the outside interface
to route and advertise the subnet to the outside network.
z
nat
<
nat-list-number
>
natstatic-entry
<
inside-local-address
>
<
outside-global-address
>
1.
When it is necessary to access servers in the local network from outside,
the user can define static entry for address translation with this
command.
2.
NAT-list-number: Define any number between 0 and 7.
3.
Start-address/End Address: Define the start address and the end
address that NAT uses.
z
nat
<
nat-list-number
>
nat
time-out
<
timer-value
>
1.
Defines time value for the NAT list to recover the address into free status
when communication is idle.
2.
The default is 300 seconds.
z
nat-group
<nat-list-number> {
nat/pat
}
As an interface command, Applies the NAT-list that has been set in the
global mode to the corresponding interface.
