PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
138
-
[Procedure]
Step
Operation
1
Move to the configuration mode.
2
Set a SNMP community.
3
Set the host to receive SNMP trap.
4
Set SNMP related parameters.
5
Moves to the IP configuration mode.
6
Apply the queue-group that has been set to the corresponding serial
interface.
7
Use “show snmp” command to check if configuration has been
correctly made.
[Related Commands and Syntax]
z
snmp community
<
snmp-manager-ip/0.0.0.0
> <
community-string
> {
ro/rw
}
1.
Register the Gateway in a certain SNMP community.
2.
<snmp-manager-ip/0.0.0.0>: IP address of the SNMP Manager.
“0.0.0.0” is an option that enables all NMSs that have same
community-string values to function as the manager of the SNMP.
3.
Community-String: String used for authentication during SNMP
communication
4.
{ro/rw}: Sets whether to only read Gateway information or read and
write setting values of the Gateway.
z
snmp host
<
trap-host-ip
> <
community-string
> {
v1/v2c
}
1.
Registers the host to which the Gateway sends trip and the SNMP
version when trap occurs.
2.
<trap-host-ip>: IP address of the trap host (SNMP manager)
3.
Community-String: String to be used for authentication during SNMP
communication
4.
{v1/v2c}: SNMP version
