PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
33
-
3.1.3.
Plug-In Power
z
The PassFinder AP2520 Gateway is capable of recognizing and using both
110V and 220V.
z
The package provides a 220V power cable. If the power supply is 110V,
please use a 110V adapter.
z
Switching the power switch on will turn the Power LED on the front side of
the Gateway green.
z
The supply of power will display the booting message on the console
terminal and will turn the RUN LED green
z
When the Gateway is being booted, the messages are displayed : (Refer
to Diagram 3.3)
9
The booting title message is displayed. (This message contains
information about the routing software version, Gateway status check
results, memory size and status)
9
On the display of the log-in message, input the username “root” and
the password “router”.
9
The completion of log-in will display the prompt “1router#” on the
Gateway console terminal.
9
There are two types of prompts displayed for the PassFinder AP2520 :
“1router>” and “1router#”. The “
>
” prompt indicates that the user is
not an administrator. At this prompt, the user is unable to use certain
commands : particularly the configuration commands. The “
#
”
prompt indicates that the user is an administrator(or root), and is
authorized to use all the functions and commands.
Warning
STOP
