PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
197
-
5.3.7.3.
Applying Translation Rules to the Inbound VoIP Calls
To apply the translation rule set to all calls received from the network, make
following setting.
Step Command
Description
1
Router# configure
Enters into the global configuration
mode.
2
Router(config)# voice service VoIP
Enters into the voice service VoIP
setup mode.
3
Router(vservice-VoIP)#
translate-VoIP-incoming {called-number |
calling-number}
tag
called-number:
Applies the
translation rule to the inbound called
party.
calling-number
: Applies the
translation rule to the inbound calling
party number.
The
tag
refers to the rule set and tag
values range from 0 to 65535.
5.3.7.4.
Applying Translation Rules to the Outbound Calls
To apply the translation rule set to the outbound calls going to a certain dial
peer (POTS peer or VoIP peer) make following setting.
Step Command
Description
1
Router# configure
Enters into the global configuration
mode.
2
Router(config)# dial-peer voice
tag { pots |
VoIP }
Enters into the dial-peer configuration
mode.
The tag is the only identifier of the
dial-peer of this system, and tag
values include 0 ~ 65535.
3
Router(dial-peer-config)# translate-outgoing
{called-number | calling-number}
tag
called-number:
Applies the
translation rule to the outbound
called party number.
calling-number
: Applies the
translation rule to the outbound
calling party number.
The
tag
refers to the rule set and tag
values range from 0 to 65535.
