PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
82
-
reach that address. (An optional command for dynamic mapping.
Dynamic mapping cannot be made at the same time with static
mapping for an interface.)
2.
This command can be used for both of the main interface and the
sub-interface.
z
frame-relay inverse-arp
[
interval
<
Interval-value(sec)
> ]
Sets the interval that the router can send the inverse-ARP request to the
frame-relay peer in the other side. (Default: 15)
z
frame-relay access-rate
[
<
max_access_rate(bps)
> [
input
<m
ax_input_rate(bps)
> [
output
<m
ax_output_rate(bps)
>]
1.
Sets the sum of CIR values in the frame-relay interface. To use a
frame-relay PVC in the interface lower than E1, use this command.
2.
“Input” and “Output” options decide the maximum access rate for the
input and the output respectively.
3.
The sum of the inputs and outputs shall not exceed total
Max_Access_Rate.
z
frame-relay lmi-n391
<
events(1~255)
>
Sets the polling counter for the frame-relay full status.
z
frame-relay lmi-n392
<events(1~10)>
Sets the threshold for the frame-relay LMI error.
z
frame-relay lmi-n393
<events(1~10)>
Sets the event counter that is monitored in the frame-relay LMI.
z
frame-relay lmi-t391
<time(5~30)>
Sets the time-interval that is polled in the frame-relay DTE.
z
frame-relay lmi-t392
<time(5~30)>
Sets the verification timer of the interval that is polled in the frame-relay
DCE.
