PassFinder AP2520 VoIP Router/Gateway Operation Manual
Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd.
-
73
-
name to request connection to the PPP server device when using PPP
CHAP authentication. (An optional command for CHAP
authentication)
2.
If this command is not used, the router name (displayed in the router
prompt) will be considered as the user name.
z
ppp chap password
password
This command is for PPP client devices. This command registers a
password to request connection to the PPP server device when using PPP
CHAP authentication. (An optional command for CHAP authentication).
z
ppp pap sent-username
username
password
password
Sets PAP authentication in the PPP client device. When the client device
sets a PPP call, the client device sends the user name and the password to
the server for authentication. At this time, the user name and the
password shall be the same with those set in the server. (An optional
command for PAP authentication)
z
ppp peer default-ip-address
<
ip-address>
1.
Sets the router as a PPP server and the IP address to allocate to the
serial interface of the other side. (An optional command)
2.
When the router receives the IP address, the router decides the subnet
mask of the IP address that it received based on the IP subnet that has
been set in its local interface.
z
ppp timeout
<
second
>
1.
Sets PPP negotiation timeout for PPP negotiation between two routers.
(An optional command)
2.
The default is five seconds.
z
shutdown / no shutdown
An optional command to make the current interface up/down.
z
show interface
<if-name>
Shows the interface status of “if-name.”
