Acer ATL 1820E, Operation Manual

Page: 3 / 76

Content
3.3.2 Machine Lifting ………………………………………………………………………… P 3-5
3.3.3 Machine Placing …………………………………………………………………………… P 3-6
3.3.4 Machine Clean & Lubrication ……………………………………………………… P 3-6
3.4 Machine Leveling ……………………………………………………………………………………… P 3-7
3.5 Lubrication ……………………………………………………………………………………………… P 3-7
3.5.1 Lubrication pump specification …………………………………………………… P 3-7
3.5.2 Lubrication System ……………………………………………………………………… P 3-9
3.5.3 Lubrication system on Headstock ………………………………………………… P 3-10
3.5.4 Lubrication on tailstock ……………………………………………………………… P 3-10
3.6 Chucks and chuck mounting …………………………………………………………………… P 3-11
3.6.1 Chuck fitting on spindle nose ………………………………………………………. P 3-11
3.7 Tailstock center loading & unloading ……………………………………………………… P 3-11
3.8 Coolant …………………………………………………………………………………………………… P 3-11
4 MAINTENANCE
4.1 Lubrication System ………………………………………………………………………………… P 4-1
4.1.1 Replacing headstock Oil ……………………………………………………………… P 4-1
4.1.2 Fittings ………………………………………………………………………………………… P 4-2
4.2 Machine body …………………………………………………………………………………………… P 4-2
4.2.1 Aligning Headstock ………………………………………………………………………. P 4-2
4.2.2 Cross-slide …………………………………………………………………………………… P 4-3
4.2.3 Saddle …………………………………………………………………………………………… P 4-3
4.2.4 Aligning tailstock to spindle …………………………………………………………. P 4-3
4.2.5 Adjusting belt tension of spindle………………………………………………….. p 4-4
4.2.6 Adjusting belt tension of X-axis ………………………………………………… P 4-4
4.3 Electric equipment ……………………………………………………….………………………… P 4-4
4.3.1 Motor ………………………….…….……………………………….………………..….…… P 4-4
4.3.2 Control units ………………………….…….………………………………….…….…… P 4-5
4.3.3 Wire connectors ………………………….…….………………………….…….…….… P 4-5
4.4 Simple trouble shooting ………………………….…….……………………………….…….… P 4-5
4.5 Remove chip and renew coolant ………………………….…………………………….…… P 4-6
4.6 Notice for maintenance and inspection ……………………………………….…….…… P 4-7
4.7 Maintenance and Inspection List ………………………….………………………..….…… P 4-10
5 CHUCK
5.1 Instruction manual…………………………………………………………………………………… P 5-1
8.1.1 Safety precautions……………………………………………………………………….. P 5-1
5.2 Specifications…………………………………………………………………………………………… P 5-3
5.3 Installation……………………………………………………………………………………………….. P 5-3
5.4 Maintenance and Inspection…………………………………………………………………….. P 5-4
5.5 Trouble shooting………………………………………………………………………………………. P 5-5