manualshive.com logo in svg

Acer Altos RAIDWatch, Manual

The Acer Altos RAIDWatch manual is available for free download on our website. This comprehensive manual provides step-by-step instructions for using the Acer Altos RAIDWatch product, ensuring users can easily configure and manage their RAID systems. Simply visit manualshive.com to download your free copy now!

Share
Download
background image

Operation

 47

Chapter  4

 Operation

This chapter discusses basic Altos RAIDWatch Manager operations. We recommend that you review 
it to learn the basic organization and functions of the program. This chapter includes the following 
topics:

• Starting Altos RAIDWatch, 4.1 on page 47.

• Starting Altos RAIDWatch Manager,4.2 on page 48

• Connecting and disconnecting from a disk array, 4.3 on page 50.

• Setting up security, 4.4 on page 53.

• Look and Feel, 4.5 on page 55.

• Using the RAIDView Window, 4.6 on page 58

• Using the Enclosure Window, 4.7 on page 64

• Event Window, 4.8 on page 66

• the Statistics Window, 4.9 on page 67

• Exiting Altos RAIDWatch Manager, 4.10 on page 69.

4.1 Starting Altos RAIDWatch 

4.1.1 Starting Altos RAIDWatch Agents

4.1.1.1 Under Windows (NT 4, or 2000/XP) Operating Systems

The Primary Agent and Secondary Agents start automatically under Windows Operating Systems 
each time the host computer is reset. 

Summary of Contents for Altos RAIDWatch





















































































































































































































Reviews:

No comments

Related manuals for Altos RAIDWatch

DAVIS WeatherLink Addendum preview
WeatherLink
Brand: DAVIS Pages: 20
EAW Resolution Introduction Manual preview
Resolution
Brand: EAW Pages: 36
Native Instruments Scarbee Mark 1 User Manual preview
Scarbee Mark 1
Brand: Native Instruments Pages: 14
TANDBERG Codian Remote Management API Reference Manual preview
Codian Remote Management API
Brand: TANDBERG Pages: 66
Adobe 13101332 - Photoshop - Mac User Manual preview
13101332 - Photoshop - Mac
Brand: Adobe Pages: 549
Fargo Persona Persona M30e User Manual preview
Persona Persona M30e
Brand: Fargo Pages: 31
MACROMEDIA FLASH 8-ACTIONSCRIPT 2.0 LANGUAGE Reference preview
FLASH 8-ACTIONSCRIPT 2.0 LANGUAGE
Brand: MACROMEDIA Pages: 1378
Symantec BACKUP EXEC 11D Quick Installation Manual preview
BACKUP EXEC 11D
Brand: Symantec Pages: 18
Symantec ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S Release Note preview
ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S
Brand: Symantec Pages: 14
Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 Manual preview
ALTIRIS DEPLOYMENT SOLUTION 7.1
Brand: Symantec Pages: 90
GRASS VALLEY EDIUS User Reference Manual preview
EDIUS
Brand: GRASS VALLEY Pages: 790
IBM I VIRTUALIZATION - READ ME FIRST 7-9-2010 Manual preview
I VIRTUALIZATION - READ ME FIRST 7-9-2010
Brand: IBM Pages: 48
McAfee VIRUSSCAN 5.1 User Manual preview
VIRUSSCAN 5.1
Brand: McAfee Pages: 315
Xerox DocuColor 242 User Manual preview
DocuColor 242
Brand: Xerox Pages: 32
Tascam GVI Owner'S Manual preview
GVI
Brand: Tascam Pages: 33
HP EliteBook 2560p Maintenance And Service Manual preview
EliteBook 2560p
Brand: HP Pages: 122
HP EliteBook 2760p Brochure preview
EliteBook 2760p
Brand: HP Pages: 3
HP EliteBook 2760p Maintenance And Service Manual preview
EliteBook 2760p
Brand: HP Pages: 115

Brands by name

Popular brands

Load more brands