manualshive.com logo in svg

Acer Altos RAIDWatch, Manual

The Acer Altos RAIDWatch manual is available for free download on our website. This comprehensive manual provides step-by-step instructions for using the Acer Altos RAIDWatch product, ensuring users can easily configure and manage their RAID systems. Simply visit manualshive.com to download your free copy now!

Share
Download
background image

The NPC

 145

Chapter  11

The Notification 
Processing Center

The Notification Processing Center (NPC) is a notification application that enables users to 
configure notifications that are transmitted when various disk array events occur. The NPC makes 
it possible to manage (or monitor) the disk array system even when the administrator is away from 
the manager station. When properly configured, this function can notify the administrator of event 
occurrences in a RAID array instantly. 

This Chapter introduces the following NPC topics:

• Before You Begin, 11.1 on page 146 

•  Basic Running Requirements, 11.2 on page 146

• Redundant NPC Modules, 11.3 on page 147

• Severity Levels, 11.4 on page 1475

• Configuring Notification Options, 11.5 on page 148

• Configuring Pager Notification , 11.6 on page 152

• Configuring Broadcast Message Notification, 11.7 on page 152

• Configuring E-Mail Notification , 11.8 on page 153

• Configuring SNMP Trap Notification, 11.9 on page 154

Summary of Contents for Altos RAIDWatch





















































































































































































































Reviews:

No comments

Related manuals for Altos RAIDWatch

Juniper RESIDENT CONSULTANT Datasheet preview
RESIDENT CONSULTANT
Brand: Juniper Pages: 4
TC Electronic Tap Factory Product Manual preview
Tap Factory
Brand: TC Electronic Pages: 12
PS Audio PowerPlay Programming Manual preview
PowerPlay
Brand: PS Audio Pages: 6
Waves Multimaximizer L3-16 User Manual preview
Multimaximizer L3-16
Brand: Waves Pages: 23
Symantec NORTON INTERNET SECURITY - FOR MAC V4 User Manual preview
NORTON INTERNET SECURITY - FOR MAC V4
Brand: Symantec Pages: 28
Symantec CONFLICTMANAGER Reference preview
CONFLICTMANAGER
Brand: Symantec Pages: 54
DCP Productions Motif XS Owner'S Manual preview
Motif XS
Brand: DCP Productions Pages: 76
EverFocus ECMS User Manual preview
ECMS
Brand: EverFocus Pages: 44
Oracle B31679-01 Installation Manual preview
B31679-01
Brand: Oracle Pages: 130
Bay Networks MicroManager Installation Manual preview
MicroManager
Brand: Bay Networks Pages: 15
KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL... User Manual preview
ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL...
Brand: KAPERSKY Pages: 295
KAPERSKY ANTI-VIRUS 5.0 - FOR LOTUS NOTES-DOMINO User Manual preview
ANTI-VIRUS 5.0 - FOR LOTUS NOTES-DOMINO
Brand: KAPERSKY Pages: 137
KAPERSKY ANTI-VIRUS 5.0 - FOR SENDMAIL WITH MILTER... Administrator'S Manual preview
ANTI-VIRUS 5.0 - FOR SENDMAIL WITH MILTER...
Brand: KAPERSKY Pages: 100
KAPERSKY ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER Administrator'S Manual preview
ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER
Brand: KAPERSKY Pages: 104
Samsung 3561ND - B/W Laser Printer Manual preview
3561ND - B/W Laser Printer
Brand: Samsung Pages: 30
Harman Aha Operating Instructions Manual preview
Aha
Brand: Harman Pages: 8
Lenovo ThinkPad Z60m Series Hardware Maintenance Manual preview
ThinkPad Z60m Series
Brand: Lenovo Pages: 182
Canon ImageWare Brochure preview
ImageWare
Brand: Canon Pages: 6

Brands by name

Popular brands

Load more brands