Acer Altos RAIDWatch, Manual

Page: 180 / 212

Altos RAIDWatch User Guide
166
Figure 12–4 Connecting to a RAID Agent
2 As shown in Figure 12–5, Select the IP address of the RAID you would like to monitor from the
Connection View list. Choose and double click on an IP address. Double click the controller icon for
that IP address. Choose and double click the connection method (e.g., In-Band SCSI).
Figure 12–5 Select the IP
3 The connection is successful when the list of events shown in Figure 12–6 appears and the Physical
view and Logical unit subtrees appear in the Navigation Panel.
Figure 12–6 Event Monitor View
12.5.3 Disconnecting from a Disk Array System
• Select an IP address by single mouse click. From the
Connect
menu, select Close. This method
will disconnect with the host computer represented by its IP address. If the host is a Primary
Agent server, this will discontinue the connection to all the RAID systems managed by it.
The subtree representing the RAID system immediately disappears from the navigation panel once
disconnected.