Control Board settings and reboarding |
47
WARNING!
RFID card not readable
If the antenna of your RFID card is blocked or damaged, the card cannot be recognised.
Remove the RFID card from its protective cover or card holder to register at the RFID reader.
Do not make any modifications to the RFID card: The card must never be perforated, stamped, folded, have
stickers attached, or otherwise be manipulated mechanically.
Make sure that the RFID card corresponds to a standard that is supported by the wallbox. For more informa-
tion, see the "RFID Standard" lines in the section "Technical specifications" from page 62.
8
Check the status indicator of the charge point.
(Right-hand charge point display: 1 cycle)
• After a request by the vehicle, the charging oper-
ation in process is displayed dynamically via the
blue status indicator for the charge point.
• When the charging operation is complete, it is
automatically terminated by the vehicle, and the
status indicator for the charge point lights up
solid blue.
NOTE
No charging request or interruption of the charging operation
The status indicator for the charge point also lights up solid blue under the following circumstances:
The charging operation has not yet been started or has been paused by the vehicle.
The charging operation has not yet been started or has been paused by the internal load management.
9
Unplug the charging connector from the electric ve-
hicle's charging inlet and close it.
10
9
10
Unplug the charging connector from the charging
socket and store the charging cable.
• The charge point lid closes automatically.
11
The wallbox is ready for operation and awaits the
next charging procedure.
(Right-hand charge point display: 1 cycle)