The Wallbox eM4 Twin at a glance |
11
5
Status display with RFID reader
The circular status indicator shows the states of the two charge points by means of a multi-coloured LED
ring (see point
%
).
The RFID reader module for authorising the charging process is located centrally behind the status indica-
tor (see point
%
).
6
Wall mounting point
The wallbox is fixed in place by screwing it into the wall using the two lower attachment points (see
page 30). The corresponding screws are supplied.
7
Type 2 charging socket
Each power module
9
of the Wallbox eM4 Twin has a Type 2 charging socket for connecting a charging
cable certified in accordance with IEC 62196-1 and IEC 62196-2. The charging cables can be purchased as
accessories from ABL (see "Accessories" on page 20).
NOTE
Compatibility with RFID transponders
The Wallbox eM4 Twin supports the following RFID transponders: Mifare Classic, Mifare mini, Mifare DESFIRE
EV1, Mifare Plus S/X, Mifare Pro X, Mifare SmartMX, Mifare Ultralight, Mifare Ultralight C, SLE44R35, SLE66Rxx
(my-d move), Legic Advant, Pay Pass, Pico Pass.
To ensure the compatibility of the RFID transponder, it should be tested with the Wallbox eM4 Twin. Besides the
RFID standard used, other factors such as the dimensions of the transponder also influence compatibility. If you
need support with testing an RFID transponder, contact
ABL Customer Service
(see "Contact" on page II).
Interior and side view
The following illustration shows the Wallbox eM4 Twin with the housing cover open and from the right-hand side:
The left-hand side of the wallbox has an identical design.
Reset
Interior view of electronic components
Right-hand side