| Description of the charging process
46
5
Check the status indicator of the wallbox
(Display: 1 cycle).
• If the charging operation has to be enabled using
an RFID card, a blue chase light is shown dynami-
cally on the status indicator.
»
Anti-clockwise: right charge point
»
Clockwise: left charge point
6
Hold a valid RFID card in front of the status indicator.
7
Pay attention to the wallbox’s acoustic signals.
• If the RFID card has been read successfully, the
wallbox emits a short sound signal and the wall-
box checks the authorisation of the RFID card.
• After successful authorisation, the wallbox emits
two further short sound signals and activates the
charging operation.
• If the authorisation is not successful, the status
indicator for the charge point lights up orange for
a short period and the wallbox emits three long
sound signals.
• The blue chase light is then displayed again: Hold
a valid RFID card in front of the status indicator.
NOTE
The authorisation of the RFID card is not successful
If the RFID card could not be verified, do one of the following:
Operating the wallbox with a backend:
Please contact the issuer of the RFID card.
Operating the wallbox without backend:
Make sure that the RFID card has been registered to the relevant