L920Pro Wireless Base
Please check the components after unpacking. If any one of
them is missing, or if there is a page missing from the product
manual,ect.,please contact the dealer.
Product manual
L920Pro-BE
Trunking
The matching diagram for A920Pro host and L920Pro wireless
base is as follows:
1) Connect the base's Power port with the power adapter.
2) Connect the base's RS232 port with the cash register's serial
port. (When you do this step, skip step 3.)
3) Connect the base's USB Slave port with the cash register's
USB port.(When you do this step, skip step 2.)
4) According to the requirements, connect the base's LAN port
with the gateway device, such as router, LAN switch. (This
step is optional.)
5) Embed the connected cables in the trunking according to the
outlet direction at the bottom.
6) Place the base on a stable flat surface to complete the base
installation.
Contents Checklist
Charging Contact
Charging Contact
Front
Rubber Foot
Rubber Foot
Nameplate
Barcode
Rubber Foot
Rubber Foot
Back
Type-C
USB HOST
Power
Reset Button
Indicator
Quick Setup Guide
PAX TECHNOLOGY INC.
PAX TECHNOLOGY INC.
