| Introduction to the Wallbox eM4 Twin
14
Charging process active
After a request by the vehicle, the charging operation in
process is displayed dynamically via the blue status in-
dicator for the charge point. The right half of the status
indicator is assigned to the right-hand charge point, the
left half to the left-hand charge point.
(Illustration: Right-hand charge point)
Charging process completed or paused
If the charging process has been completed or paused
by the vehicle or the load management, the half corre-
sponding to the charge point lights up static blue.
(Illustration: Right-hand charge point)
Malfunction
If an error has occurred during operation, the status in-
dicator pulses red. The right half of the status indicator
is assigned to the right-hand charge point, the left half
to the left-hand charge point.
(Illustration: Right-hand charge point)
RFID card recognised
If the RFID card has been recognised by the RFID reader,
the wallbox emits a short sound signal.
RFID card authorisation successful
If the RFID card has been successfully authorised, the
wallbox emits two short sound signals.
RFID card authorisation rejected
If the authorisation of an RFID card has failed, the half
corresponding to the charge point lights up static or-
ange. In addition, the wallbox emits three long sound
signals.
(Illustration: Right-hand charge point)