Replacing the charging socket flap |
55
Replacing the charging socket flap
You can replace the flaps of the Type 2 charging sockets if they are damaged or no longer close reliably.
End customer
Specialist electrical
contractor
Construction
Required components:
Number / spare part
100000261 / Spare part eM4 charging socket flap
Accessories
–
Tool
Torx TR 20 screwdriver, Torx 20 with hole
Proceed as follows to replace the flap of a charging socket:
1
Open the charging socket flap and locate the four TR
20 screws in the frame of the charging socket flap.
2
Loosen the four screws with a Torx TR 20 screwdriver
and pull the charging flap off the wallbox.
4×
3
Place the new charging flap over the frame of the
Type 2 socket on the housing and screw it in place
with the four screws supplied and the screwdriver.
4×
This completes the replacement of the charging socket flap. If necessary, repeat the procedure for the wallbox’s second
charging socket.
