Safety instructions |
7
General safety information
Please read this manual carefully.
Heed all warnings and follow all instructions.
Keep this manual in a safe place where it can be accessed at all times: The contents of this manual, and the
safety notices in particular, must be available to all users of the product.
The product must only be operated after final approval by a qualified specialist electrical contractor.
The product must not be covered with stickers or other objects or materials.
Do not under any circumstances make alterations to the product. Any disregard of this instruction represents a
safety risk, fundamentally breaches the guarantee provisions and may void the warranty with immediate effect.
Qualified specialist personnel
Mechanical installation should be carried out by qualified specialist personnel.
Electrical installation and testing must be carried out with reference to local rules by a qualified specialist
electrical contractor, who, on the basis of their specialist training and experience, as well as their knowledge of
the relevant standards, is able to assess and carry out the working steps described in this manual and recognise
potential hazards.
Qualified personnel have technical training and the experience and knowledge of the relevant standards to assess
and carry out the described work steps and to recognise and avoid any hazards.
Guidelines and regulations
Electrical installation and testing must be carried out by a qualified specialist electrical contractor, taking into
account local rules and regulations.
Please note that electrical grid operators, energy suppliers or national regulations may require notification of or
approval for the installation or operation of a charging station.
Ensure that the rated voltage and rated current of the product comply with the parameters of your local electricity
grid and that the rated output is not exceeded during operation.
Operating environment
The device must not be installed in close vicinity to running water, water jets or areas subject to flooding.
The product must not be installed in explosive atmosphere areas (EX areas).
The product must never be installed or operated in confined spaces.
Do not exceed the maximum permissible ambient temperature during operation (see "Technical specifications"
on page 62).
It is recommended that the product is not operated in direct sunlight, if possible.
Interference sources
Please note that operating a radio transmitter in the immediate vicinity (< 20 cm) of the product may lead to
malfunctions.
Accessories
It is advisable to only use accessories intended and sold for the product by ABL.
Only use charging cables that comply with the IEC 62196 standard.