ABB FlexMT, Product Manual, Page: 215 / 246

13.2.4 View and change parameters
Display Action Step
Go to the Main menu by pressing if you
are in the output mode, otherwise by press-
ing repeatedly until you see MENU at
the bottom.
1
If the panel is not in the Parameter mode
(“PAr” not visible), press key
or
until you see “PAr” and then press .
The display shows the number of one of the
parameter groups.
2
Use keys and to find the desired
parameter group.
3
Press . The display shows one of the para-
meters in the selected group. 4
Use keys and to find the desired
parameter.
5
Press and hold for about two seconds
until the display shows the value of the
parameter with
underneath indicating
that changing of the value is now possible.
Note: When is visible, pressing keys
and simultaneously changes the
displayed value to the default value of the
parameter.
6
Use keys and to modify the
parameter value. When you have changed
the parameter value, starts flashing.
• To save the displayed parameter value,
press
• To cancel the new value and keep the ori-
ginal, press .
7
3HAC051768-001 Revision: - 215
© Copyright 2014-2014 ABB. All rights reserved.
13 Appendix A: Configuration
13.2.4 View and change parameters