ABB CoriolisMaster FCM2000, Operating Instructions Manual

Page: 51 / 128

Commissioning
D184B111U02 CoriolisMaster FCM2000 51
Pos: 38.8 /Überschriften/1.1/1-spaltig/J - L/Kontrolle vor der Inbetriebnahme @ 0\mod_1131981195011_3101.doc @ 3486 @ 22
5.2 Preliminary checks prior to start-up
Pos: 38.9 /Inbetriebnahme/Durchfluss/FCM2000/Kontrollen vor Inbetriebnahme/Profibus PA Adressierung @ 7\mod_1171891976250_3101.doc @ 68849 @ 3
5.2.1 Hardware switch for PROFIBUS PA address setting
There is a 10-position DIP switch in the converter. It is not visible from the outside. The switch
can be operated when the housing cover is open. The switch position is displayed on the device
in the data link submenu. It can also be read via the PA bus in the transducer block.
Warning – Risk to persons!
When the housing cover is open, EMC and protection against contact are suspended. There
are electric circuits within the housing which pose a contact risk.
The auxiliary power must be switched off before opening the housing cover.
G00362
Fig. 49
Switch 8 determines whether the address is set by switch:
On: The address is set using the switches 1-7. It cannot be changed via the bus.
Off: The address is set via the bus or the menu. Switches 1-7 have no significance.
Switches 1-7: Hardware address setting, binary coded. Valid addresses 0-125.
Switch 9 and A have no significance for the address setting.
Example:
Address 50 set by switch: 50 dec = 32 hex = 110010 binary → Switch 2, 5, 6 and 8
G00363
On
1 2 3 4 5 6 7 8 9 A
Fig. 50