ABB CoriolisMaster FCM2000, Operating Instructions Manual

Page: 12 / 128

Safety
12 CoriolisMaster FCM2000 D184B111U02
Pos: 5.21 /Sicherheit/Durchfluss/FCM2000/Fabrikschilder FCM2000 (Durchfluss) @ 8\mod_1178194332703_3101.doc @ 88383 @
1.8.1.2 Factory plates
The factory plate is located on the flowmeter primary housing. If the pressure equipment is
subject to the PED (see section 3 para. 3 PED 97/23/EC), two labels are required:
Pressure equipment subject to PED
S.-Nr.: 0012345
0045
DN 50 / PN 40
Material: 1.4571
Manufactured: 2002 PED: Fluid 1, Gas
ABB Automation Products GmbH
37070 Göttingen - Germany
1
2
3
4
5
6
G00410
Fig. 4
The factory plate contains the following information:
1 CE mark (with number of labeled location) to confirm the device meets the requirements of
pressure equipment directive 97/23/EC.
2 Serial number for identification of the pressure equipment by the manufacturer.
3 Nominal size and nominal pressure rating of pressure equipment.
4 Flange material, liner material and electrode material (parts that come into contact with fluid).
5 Year of manufacture for device and information on fluid group as per the
P ressure E quipment D irective (PED). Fluid group 1 = hazardous fluids, liquid, gaseous.
6 Manufacturer of the pressure equipment.
Pressure equipment outside the applicable range of the PED
S.-Nr.: 0012345
DN 50 / PN 40
Material: 1.4571
Manufactured: 2002 PED: SEP
ABB Automation Products GmbH
37070 Göttingen - Germany
G00411
Fig. 5
The factory plate contains most of the specifications included on the plate described above with
the following differences:
• There is no CE mark because the pressure equipment, as per section 3 para. 3 of the PED,
is outside the applicable range of the pressure equipment directive 97/23/EC.
• The reason for the exception is specified in section 3 para. 3 of the PED. The pressure
equipment is categorized as SEP (= sound engineering practice).
Important
If the factory plate is not present, the device is not in compliance with directive 97/23/EC. The
exception applies for water, power and connected equipment accessories in accordance with
guideline 1/16 of sec. 1 para. 3.2 of the pressure equipment directive.
Pos: 5.22 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 @