ACS2000 User manual
2UEA001270 Rev. F
4-3 (8)
Chapter 4 - Transportation, storage and disposal
4.1.2.2 Using a crane
Observe the following points when using a crane:
•
Use lifting equipment (web slings, chain slings, round slings, safety
hooks, shackles, etc.) that corresponds to the size and weight of the
cabinet.
•
Attach slings to the holes of the four lifting brackets using a spreader
bar (see Figure 4-2).
•
Do not pass a sling through the fastening hole.
•
Use appropriate safety hooks or shackles to attach a sling.
•
A spreader bar must be used when lifting the drive. Verify that the
straps are no more than 5° from vertical (see Figure 4-2).
WARNING
The drive should always be moved by level 2 certified rigger personnel.
Figure 4-2
Transporting the cabinet by crane using lifting brackets
(Frame 3 pictured)
Less than 5°
Legend
1
Lifting brackets -
each corner
2
Slings
3
Spreader bar (not
provided)
4
Lifting hooks
Summary of Contents for ACS2000 DFE
