ABB ACS2000 DFE, User Manual

Page: 181 / 214

ACS2000 User manual 2UEA001270 Rev. F 10-1 (32)
Chapter 10 - Troubleshooting and maintenance
10.1 General information
10.1.1 Required qualification
Maintenance and parts replacement on the drive must be performed only
by qualified personnel, and in compliance with local regulations.
10.1.2 Warranty period
During the warranty period of the drive, any repair work must be performed
exclusively by ABB service personnel. After the warranty period, repair
work may only be performed by qualified personnel.
10.1.3 Training courses
ABB offers maintenance and service training courses. Customer staff
having successfully attended such courses, will be certified to do
maintenance and repair work on the drive. To maintain safe and reliable
operation of the drive, ABB recommends taking out a service contract with
the ABB service organization.
For more information contact the ABB service organization. See section
General information on manual and equipment for contact information.
10.1.4 Maintenance schedule
ABB strongly recommends that all maintenance tasks listed in Appendix A
- ACS2000 maintenance schedule, located on the CD, and applicable
service instructions are performed on time and at the stated intervals.
10.1.5 Log book
ABB recommends recording all troubleshooting and maintenance work in
a log book including:
• Date and time
• Detailed description
10.1.6 Spare parts
Only use spare parts recommended and approved by ABB. See Appendix
F - Spare Parts list, located on the CD, for information on types and
identification codes.