MAN# 650704B
1
Switch Assembly
ECD-200BT
ELECTRONIC CABLE DRIVE
The Dakota Digital ECD-200BT is designed operate a cable-driven speedometer from a
transmission or ECM electric speed signal or from an OBDII port connection. The supplied cable
threads on to one end of the ECD-200 and the wiring harness exits on the other end. Do not use the
vehicle’s original speedometer cable. The module is fully sealed and can be mounted under the dash
or in the engine compartment. The module should not be mounted under the vehicle due to the
danger of road debris causing damage.
The unit is fully adjustable from the comfort of your driver’s
seat. Setup can also be completed by using the Dakota Digital Accessory app available for IOS or
Android devices.
Included components
Cable drive unit
