3Com TokenLink 3C339, User Manual

Page: 53 / 78

A
C
ONFIGURATION
This appendix describes how to change NIC
configuration parameter values with the 3TLVDIAG
diagnostic and configuration program.
At power up, the system BIOS automatically configures
the NIC with port address and IRQ parameters. You
cannot change these parameters with the 3TLVDIAG
program.
Table A-1 lists the 3C339 PCI NIC configuration
parameters you can change with the 3TLVDIAG program.
Table A-2 lists other 3C339 PCI NIC configuration
parameters. You cannot change these parameters with
the 3TLVDIAG program. They can be changed within the
operating system configuration files.
The parameter syntax shown in Table A-1 and Table A-2 is
for NetWare and may be included in the NetWare
NET.CFG file. The parameter syntax may be different
with different operating systems.
Table A-1 3C339 NIC Configuration Parameters (Modifiable with
3TLVDIAG)
Parameter Description Default Value Supported Values
SPEED Sets the ring speed of
the network to which
the NIC is connecting. 16 Mbps 4,16 Mbps
POST WRITE Allows the driver to
post one command to
the controller. DISABLED DISABLED
ENABLED
(continued)
Book Page 1 Thursday, June 5, 1997 9:07 AM