3Com TokenLink 3C339, User Manual

Page: 48 / 78

4-4 C
HAPTER
4: T
ROUBLESHOOTING
The Diagnostic Test screen appears, as shown in
Figure 4-3.
Figure 4-3 Diagnostic Test Screen
8 To run all the tests once (one iteration of the test
suite), select Run Diagnostics .
The number entered in the Full Test Suite field is the
number of times the test suite will run.
To run the tests individually or in various combinations,
enter 0 in the Full Test Suite field. Then enter the number
of times you want a test to run in the field next to its
name. Then select
Run Diagnostics .
If the NIC fails a test, an information screen appears.
For a description of each test, press [F1] to access help.
The following message indicates that all tests have passed:
Diagnostics have completed with the status
of PASSED.
9 Select Exit to exit the diagnostic tests.
10 Remove the TokenDisk diskette and reboot
the computer.
3Com 3TLVDIAG – Diagnostics
Diagnostic Test
3C3X9 Node Address: 00E0FCFFFCFE Ring Speed: 16 Mbps
Select the number of iterations to run the tests:
Runs through all the tests listed below.
F1 = Help F2 = Keyboard Conventions
Exit Previous Screen Run Diagnostics Main Menu
Full Test Suite:
1
Adapter Register Test:
0
EEPROM Checksum Test:
0
Adapter Memory Test: 0
Transmit In Wrap Tests: 0
Transmit In Insert Tests: 0
Book Page 4 Thursday, June 5, 1997 9:07 AM