3Com TokenLink 3C339, User Manual

Page: 39 / 78

Installing the Microsoft Windows Driver 3-15
Windows 95
This section describes procedures for installing the
Windows 95 driver under Microsoft OEM Service Release
(OSR) versions 1 and 2.
About OSR Versions
Some computers are sold with a special Windows 95
OEM Service Release (OSR) already installed. The
installation procedures under OSR version 2 (OSR2) differ
from those of the previous OSR release (OSR1).
To determine which OSR version you are using, open
the Control Panel, select
System
, and look at System
information under the General tab. If your release is
version 4.00.950, you are using OSR1. If your release
is version 4.00.950 B, you are using OSR2.
OSR1 Installation
Follow this procedure to install the driver for Windows 95
under OSR1. It is assumed that you are already running
Windows 95.
During installation, have the Windows 95 software
accessible on diskettes, CD, or a hard drive in case the
installation utility requests files from the Windows 95
software library.
1 Install the 3C339 NIC and start the computer.
Windows 95 detects the new hardware. PCI Token Ring
Controller appears in the New Hardware Found
dialog box.
2 Click the Driver from disk provided by hardware
manufacturer radio button and click OK .
The Install from Disk dialog box appears.
3 Insert TokenDisk diskette #2 in the floppy drive.
4 Type the following path and click OK .
a:\win95
Messages appear while files are being copied. The
System Settings Change dialog box appears.
Book Page 15 Thursday, June 5, 1997 9:07 AM