3Com TokenLink 3C339, User Manual

Page: 37 / 78

Installing the Microsoft Windows Driver 3-13
6 Select bus type PCI and bus number 0 , and click OK .
The 3Com TokenLink Adapter Setup dialog box appears.
7 Select any of the following setup options and
click OK :
■
PCI slot —Autodetect, Slot 1, Slot 2, or Slot 3. It is
recommended that you use the default setting,
Autodetect.
■
Network speed —4 or 16 Mbps. This selection must
match the network speed, or an error will remove the
NIC from the network.
■
Advanced —You can specify maximum packet size,
network address, and product ID. It is recommended
that you use the default settings.
The Network Setup dialog box appears.
8 Verify that 3Com TL 3C339 Adapter is in the Installed
Adapter Cards list and that 3Com TokenLink Driver is
in the Installed Network Software list, and click OK .
Configuration messages appear. The Network Settings
Change dialog box appears.
9 Remove the TokenDisk diskette from the floppy
drive and restart the computer.
This concludes the procedure for installing the driver for
Windows NT 3.51.
Windows NT 4.0
Follow this procedure to install the driver for
Windows NT 4.0. It is assumed that you are already
running Windows NT.
1 From the My Computer group, double-click the
Control Panel icon.
2 From the Control Panel group, double-click the
Network icon.
3 In the Network dialog box, click the Adapters tab.
4 In the Adapters tab, click Add .
Book Page 13 Thursday, June 5, 1997 9:07 AM