3Com TokenLink 3C339, User Manual, Page: 41 / 78

Installing the OS/2 Driver 3-17
8 Click Yes to restart the computer.
This concludes the procedure for installing the driver for
Windows 95 under OSR2.
Installing the OS/2 Driver
To install the OS/2 driver, you need one of the following
IBM installation programs:
■
LAN Adapter and Protocol Support (LAPS)
■
Multi Protocol Transport Services (MPTS)
LAPS Installation
To install the OS/2 driver with LAPS, you must be
running OS/2 version 2.11 or later, including any software
fixes for PCI support. (For OS/2 fix packs, contact IBM.)
You also need to know the names of the network
protocols your network environment uses.
1 Insert TokenDisk diskette #2 in the floppy drive.
2 Open an OS/2 window. At the OS/2 prompt, enter:
laps
LAPS is usually located in the \IBMCOM directory on the
boot drive.
3 In the LAPS window, select Install . At the prompt
for the source of the .NIF file, type the following
path and click
OK :
a:\ndis\os2
4 When the Installation Complete for PCI Token Ring
Adapter message appears, click OK .
The LAPS dialog box appears.
5 Select Configure .
6 Verify that the Configure LAN Transport radio
button is selected, and click Continue .
The Configuration Workstation panel appears.
Book Page 17 Thursday, June 5, 1997 9:07 AM