ZIV SW3 Скачать руководство пользователя страница 8

Страница: 8 / 122

SW3

GIGABIT/FAST ETHERNET SWITCH TYPE SW3 (DIN)

8/122

USER GUIDE - M0SW3D1905Iv04 - V04 May 2019

FIGURE 3

Rings

❖

Link Aggregation by LAG function.

The Link Aggregation Group (LAG) function allows grouping several links into a single

aggregated link identifier. FIGURE 3 illustrates an example of link aggregation. From

the point of view of the STP/RSTP protocol, the connection entity is the LAG group

identifier. In this way, the different links that are part of the LAG are not handled

individually and are not considered a loop, and thus it provides the aggregated

bandwidth.

Link aggregation can be created for any of the planned interface functions: user (edge,

untag), inter-switch link (trunk or native) and those associated to the Q-in-Q

functionality (access and core). Once the LAG is selected, the set of parameters of the

interface selected as

Leader

determines the behaviour of the group.

Содержание SW3



























































































































Результаты поиска

Содержание SW3

Отзывы:

ZIV SW3, Руководство пользователя, Страница: 8 / 122

Результаты поиска

Содержание SW3

Отзывы: