ZIV SW3 Скачать руководство пользователя страница 35

Страница: 35 / 122

SW3

GIGABIT/FAST ETHERNET SWITCH TYPE SW3 (DIN)

35/122

USER GUIDE - M0SW3D1905Iv04 - V04 May 2019

5.1.1

Equipment identification

The identification zone has four parameters, the equipment name (

hostname

), its location

(

location

) and the contact data of the responsible person or company (

contact

). At least

one string of text is required, with at least one character.

The

hostname

is used automatically as a prompt value on the console.

The

DHCP

client ID

configures the

Client ID

option of the RFC 2131 in DHCP configuration

requests. If this parameter is not configured, the MAC address of the interface on which the

request is sent is used as a default value for the

Client ID

The identification parameters coincide with those assigned with the same name in the

SNMP data.

5.1.2

Access control

Access control allows the user logins and associated passwords to be determined for the

two pre-set profiles: guest and admin.

The guest profile can only access query operations. On the contrary, the admin. profile has

access to all the system configuration data.

As summarised in TABLE 1, the default values of these parameters are

guest

and

admin

as the logins, with

passwd01

and

passwd02

being the respective passwords.

It should be borne in mind that the system makes a distinction between upper and lower

case characters.

TABLE 1

System default access codes

Login

Password

Guest profile

guest

passwd01

Admin. profile

admin

passwd02

It is highly recommended to change at least the password of the admin. profile when

running the first configuration in each equipment.

It is advisable to store the new password in some type of register as, should the new

password be forgotten, it is not possible to access the web server.

Содержание SW3



























































































































Результаты поиска

Содержание SW3

Отзывы:

ZIV SW3, Руководство пользователя, Страница: 35 / 122

Результаты поиска

Содержание SW3

Отзывы: