Zipro Rook, Руководство пользователя

Страница: 13 / 120

13
EN
noises heard when rotating the pedals backwards occur for
technical reasons and have no negative consequences.
• Noise emissions are greater when loaded.
•
Before each training, make sure the protective devices are
operational and bolt and plug connections are tight.
• Wear appropriate (sports) shoes during the training.
MAINTENANCE
Carry out maintenance activities at regular intervals. The tasks listed
below should be carried out at least every 20 hours of operation.
• Check moving parts of the device. If they need lubrication, use a
bicycle bearing grease.
• Check the conditions of such parts as bolts and nuts.
Make sure they are tight.
•
Wipe the sweat off the device after each training. Make sure the
display does not come in contact with water or moisture.
• Clean the product with soapy water only. Do not use cleaning
agents.
• Store the device in a dry and warm place.
• Do not expose the device to direct sunlight.
ENVIRONMENT
The device is delivered in a package to protect it against any possible
transport damage. The packaging is made from non-processed
material and can be recycled. Throw the materials to appropriate
colour containers for selective waste collection.
Protect the environment and do not throw used batteries into
household wastes. Return them to the point of sale or a special
recycling centre.
Used electrical equipment (including the computer and power supply)
are recyclable. Do not throw them out with household waste as they
may contain substances dangerous to the health and environment. You
can actively contribute to sustainable use of natural resources and the
protection of the natural environment by handing the used device to
a recycling centre for used electrical devices.
ASSEMBLY
The device must be assembled carefully by an adult. In case of doubt,
ask a more experienced person for help.
• Prior to the assembly, make sure the set contains all
the listed elements and whether none of the parts was damaged
during transport. If any parts are missing or you have any other
reservations, contact the seller.
• Have a look at the drawings and explanations and follow the
assembly manual when assembling the device.
• Be careful during the assembly. There is a risk of injury when
using the tools and parts.
• Remember to keep your surroundings safe. Do not let tools and
parts lie around in chaos. Remember that plastic foil and bags
pose o suffocation risk to small children.
• Assembly parts necessary for a specific step in
the assembly manual are shown in pictures and included in
instructions. Use the elements indicated in the assembly
manual.
• Do not tighten parts completely during the first stages
of the assembly. Tighten connections after all parts are placed
and fitted properly.
• The manufacturer may have assembled some parts.
ASSEMBLY DIAGRAM (
→ See page 2)
ATTENTION! Do not use parts other than those provided by the manufacturer.
PARTS LIST
No. Description Quantity No. Description Quantity
1 Main frame 1 24 Computer cable 1
2 Rear base 1 25 Handlebar post 1
3 Front base 1 26 Computer bolt 4
4 Base cap 4 27 Flat washer 3
5 Level foot 4 28 Locknut 3
6 Hexagonal nut 4 29 Handlebar adjustment knob 1
7 Hexagonal bolt 4 30 Computer 1
8 Curved washer 4 31 Flat washer 1
9 Hexagonal bolt nut 4 32L/R Handlebar cover, rear/front 1/1
10L/R Left/right pedal 1/1 33 Cross-head bolt 11
11L/R Left/right crank 1/1 34 Cross-head bolt 4
12 Saddle height knob 1 35 Steering wheel 1
13 Saddle post 1 36 Heart rate measurement cable 2
14 Saddle horizontal position knob 1 37 Handlebar foam 2
15 Saddle horizontal position knob washer 1 38 Handlebar cap 2
16 U-bracket for horizontal saddle
positioning 1 39 Curved washer 2
17 Saddle guide cap 2 40 Flat washer 4
18 Saddle guide 1 41 AC adapter 1
19L/R Saddle guide cover, left/right 1/1 42 Flat washer 2
20 Saddle 1 43 Water bottle 1
21 Hexagonal bolt 2 44 Water bottle holder 1
22 Handlebar post cover 1 45 Screw 2
23 Connecting cable 1