![background image](http://html1.mh-extra.com/html/zippkits/vbox-2013-edition-deep-vee-sport-crackerbox/vbox-2013-edition-deep-vee-sport-crackerbox_building-instructions_3812149013.webp)
13
A boat!
Using sanding block to blend chines. Abox shown.
Make all edges flat. Hold sanding block 90 degrees to
chines.
Blending the
chines
Before we can glue the side sheeting in place,
we need to make sure the chines are flat. Do
this with your sanding block and fresh 80 grit
paper.
Sand the chines, using your sanding block to
blend them at the front.
Check to see if your sanding block sits flat on
the chines at all points. If it does not, the side
sheeting won’t either. The front of the chines will
need a fair bit of blending. The rear will need
very little.
When the chines have been sanded and
blended, it’s time to start the side sheeting.
Dry clamp the side sheeting in place.
We use lots of large size paper clamps.
You can buy these at your local office supply
store. Get about 24 or more…
Clamp and adjust the sheeting so that it
overhangs an equal amount on the top and
bottom. Leave a little hanging off of bulkhead 5
as well.
When it looks good, make a reference mark
somewhere that is easy to see. I make it
between 3 and 4.
Содержание VBox 2013 Edition Deep Vee Sport Crackerbox
Страница 6: ...6...