![background image](http://html1.mh-extra.com/html/zippkits/vbox-2013-edition-deep-vee-sport-crackerbox/vbox-2013-edition-deep-vee-sport-crackerbox_building-instructions_3812149019.webp)
19
Bottom glued in place.
Rear of box facing you.
Getting ready to cut the boat free of the jig.
Use a square.
Put glue on the edges, and join the two box
halves on the bench.
Lightly sand the bottom of the box.
Note that the bottom is about a half inch too
wide.
This overhang is used to screw the box in place.
Glue on the bottom. Be sure to leave a ¼ inch
overhang on each side of the box.
Leave the top off at this time.
Lightly sand the top.
Stand back and admire your awesome radio
box!
Back to the boat:
Make sure that it has been at least 3 hours
since you glued the bottom sheeting to the hull.
With your razor saw, cut all the tabs that are
holding your hull to the building jig.
Ditch the jig. We don’t need it any more.
Hey, this is really starting to look like something
now!
After you finish admiring your cool new hull, let’s
move on.
Содержание VBox 2013 Edition Deep Vee Sport Crackerbox
Страница 6: ...6...