![background image](http://html1.mh-extra.com/html/zippkits/vbox-2013-edition-deep-vee-sport-crackerbox/vbox-2013-edition-deep-vee-sport-crackerbox_building-instructions_3812149014.webp)
14
Use lots of clamps.
Brushing epoxy onto edges with cut down acid brush.
Front of side sheeting coated with epoxy.
Mark a line on the chine and the sheeting, so
that you can align the marks quickly when
gluing.
Remove the clamps.
Label the front inside of the side sheeting.
Using 30 minute epoxy, mix up about 1/2 ounce.
Stir very well.
Using a small stick or acid brush, coat the
chines and bulkhead edges. Work quickly.
Make sure that all surfaces that will touch the
sheeting are coated. Try not to use so much
that it runs all over. Brush epoxy on the front 6
inches or so of the side, to help strengthen the
high stress nose area.
Align the marks and start clamping, adjusting
the sheeting for equal overlap on the top and
bottom.
You can use your rubber band clamps here.
Do not put any clamps between bulkheads 3
and 4 yet. This is a long span, and should be
clamped last. Be very careful when clamping
this area. Don’t bend or twist the chines in this
area.
Содержание VBox 2013 Edition Deep Vee Sport Crackerbox
Страница 6: ...6...