WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a
choking hazard. Keep all plastic and wire parts away from children. This product is intended for people
ages 14 and up.
Please read all instructions carefully before assembling. Save this instruction sheet for future reference.
EASY ASSEMBLY AND OPERATION INSTRUCTIONS
01181114 Wacky Mole Clown
This item, when assembled by the following instructions, should take 15 minutes to assemble.
Please follow the step by step guide and enjoy your Wacky Mole Clown!
STEP 1
NOTE: The longer end of the (A) Base goes towards the front
Now assemble (A) Support Poles together and attach to (B) Base as shown and secure by aligning
the quick-connect push buttons into the pre-drilled holes.
STEP 2
Lower the (C) Shoes over the (B) Support Poles through the provided hole on the bottom of each (C) Shoe as
shown. Note the shoes are the same and can go on either leg. Now Place the (D) Pants over the support
poles as shown. Note that the stripes on the pants are on the right leg and the polka dots are on the left leg.
PROCEED TO PAGE 2 > >
1/3
PARTS LIST
A. Base
B. Support Poles (x4)
C. Shoes
D. Pants
E. Torso
F. Hip Ring
G. Shoulder Frame
H. Shirt
I. Left Arm
J. Right Arm
K. Left Hand
L. Right Hand with Hammer
M. Head
N. Neck Ruffle
UL Adapter *
* UL Power Adapter Spec
Input: 100 - 240VAC 50/60Hz
Output: 6.0V 1A
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors or in a sheltered outdoor area. We also recommend that
you bring your item indoors during adverse weather (extreme cold, strong winds and/or rain). When not in
use, store this product in it’s original packaging. Keep away from heat and moisture.
A
A
F
K
G
H
I
J
L
M
N
B
B
B
B
C
C
D
D
B
C
D
E
2013 0424
FRONT
