Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 13 / 268

Version 11.0
G-30-1435-en
Page 13
S7 / OPMI PROergo Safety measures
– in areas where there is a risk of explosion,
– or at a distance of less than 25 cm from flammable anesthetics or
volatile solvents such as alcohol, benzine or similar substances.
• Do not use or store the device in a damp place. Do not expose the system
to dripping water, running water, sprayed water or splashes.
• Ensure that fluids cannot enter the device.
• Ensure that the installation conditions and the use of the device meet
surgical requirements:
– Low vibration
– Clean environment
– Avoidance of extreme mechanical stress
Electrical safety • Always switch off the device before you plug it into or unplug it from the
electricity network, if you are not going to use it for a prolonged period of
time, or if you want to clean its surface.
• Switch off the system at the power switch if you notice any smoke, sparks
or unusual noise. In this case, do not use the device again before it has
been repaired by our Service department.
A potential equalization connector is provided on the instrument's connection
panel (see IEC60601-1). This connector can be used to connect other active
devices to the same ground potential or for redundant connection to the
protective ground.
• Do not use multiple sockets!
• Never open the device! The device contains freely accessible live
components. If you remove the housing, you run the risk of electric shock.
• Do not touch the device if your body is electrostatically charged and the
device is not grounded.
• Please note the information on EMC (electromagnetic compatibility ) in
the chapter "System data" on Page 254.
Transport & Service • The system may only be transported over long distances (e.g. during
relocation, return for repair, etc.) in its original packaging or in special
return packaging. Please contact your dealer or ZEISS Service for this
purpose.
• This instrument is a high-grade technological product. To ensure optimum
performance and safe working order, we recommend having it checked
by our service representative as part of regular scheduled maintenance.