Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 188 / 268

Operation S7 / OPMI PROergo
Version 11.0
Page 188 G-30-1435-en
Balancing

The suspension arm is properly balanced. If the suspension arm is properly
balanced, the surgical microscope should remain immobile in all positions
within the working range and should not swivel up or down.
Stroke limit

The minimum working distance (height) from the surgical field has been
adjusted.
Optional foot control panel

Check that the plug of the foot control panel has been connected.

Check that the power switch of suspension system has been switched on.
• Check that all functions assigned to the respective buttons on the foot
control panel are working properly.
SpeedFokus (Autofocus) option
Settings and matching when using an external video camera

Check that the video camera position, the focal length of the video optics
and the size of the CCD array have been correctly entered in the Autofocus
menu.

Check that the video system and the surgical microscope have been
matched to each other, i.e. when the image is in focus in the microscope
eyepieces, the video image on the monitor must also be in focus (also
applies to the integrated video camera).

Check that the image on the monitor has the same orientation as the
image in the main eyepieces.
Focusing process
Check that focusing can be activated according to the programming of the
buttons:

using buttons A, B, C and/or D of the handgrips.

using button C and/or D of the foot control panel, if a foot control panel
with 8 or 14 functions (option) is provided.