Zeiss OPMI PROergo S7, Инструкция по эксплуатации, Страница: 196 / 268

Operation S7 / OPMI PROergo
Version 11.0
Page 196 G-30-1435-en
Working with the SpeedFokus (autofocus) option
The SpeedFokus autofocus option permits you to select an area of special
interest to you in the surgical field. SpeedFokus focuses on this selected area
at the press of a button. Focusing is triggered on the buttons of the handgrip
or foot control panel as configured in the Options menu.
• Look through the eyepieces and activate the focusing function until the
image of the surgical field appears sharply focused. The image on the
video monitor must also be sharply focused.
• Watch the image on the S-video monitor (which is connected to the
S-video connector) and position the measuring field (ROI), i.e. the square
frame, in the area in which you are particularly interested.
• Activate focusing by the SpeedFokus autofocus function.
If the ROI in the surgical field is marked by major height differences with
steeply sloping edges, it may happen that SpeedFokus focuses on the wrong
feature in the surgical field. You can correct this as follows:
• Slightly shift the ROI and/or reduce its size.
• Re-activate focusing by the SpeedFokus autofocus function.
CCU of the 1Chip
HD camera option
SpeedFokus
(optional)
SD-video monitor
on S-video
connector
HD video monitor
on HD SDI or DVI
connector
S-Video
HD SDI or DVI