Zeiss OPMI PROergo S7, Инструкция по эксплуатации, Страница: 26 / 268

Safety measures S7 / OPMI PROergo
Version 11.0
Page 26 G-30-1435-en
Ceiling mount with lifting column
Lifting column
Selector switch
for setting the optimum viewing height of the surgical microscope or for
downward movement into the working position.
As long as the selector switch remains in the turned position, the lifting
column moves upward (2) or downward (1), depending on the switch
position. When you release the selector switch, the lifting column stops
immediately.
The switching technology causes a delay of approx. 2 seconds at the upper
and lower end positions of the lifting column. After this time elapses, you can
move the column in the opposite direction again by activating the selector
switch again.
After being in operation for a maximum of one minute, the lifting column
must be turned off for at least nine minutes to prevent the motor from
overheating.
– Before raising or lowering the mount, make sure that there is sufficient
clearance to avoid collision with other objects.
1 2
CAUTION Risk of injury caused by lifting column
Activating the lifting column may cause injuries.
• Do not activate the lifting column during surgery.
• Do not use the lifting column for focusing.
• Make sure that the patient is not put at risk by the motorized adjustment
of the lifting column.