Zeiss OPMI PROergo S7, Инструкция по эксплуатации, Страница: 211 / 268

Version 11.0
G-30-1435-en
Page 211
S7 / OPMI PROergo What to do in the event of malfunctions
SpeedFokus video autofocus
Fault Possible reason Corrective measure Cross
reference
SpeedFokus video
autofocus is inoperative.
Camera control unit (CCU)
switched off. • Switch on MediLive
controller (CCU).
Monitor switched off. • Switch on the monitor.
Failure of the SpeedFokus
video autofocus system. • Notify Service.
Poor focusing result
or none at all.
Focusing of the video
camera not matched to
focusing of the surgical
microscope.
• Focus the microscope
image, then the video
image.
Measuring field (ROI)
incorrectly positioned. • Correct the ROI position
in submenu "AF - ROI
Position". Page 128
Suspension system moved
during focusing. • Do not move suspension
system during focusing.
No object in focusing
range.
• Reposition surgical
microscope.
No object with sufficient
contrast in focusing
range.
• Reposition surgical
microscope or focus
manually.
In external video camera:
Poor focusing result
or none at all.
Incorrect entry for camera
orientation (left/right). • Call up Autofocus
menu and change
Camera Position.
Page 127
Incorrect entry for Video
Focal Length. • Call up Advanced
Settings submenu
and enter correct
focal length.
Page 129
Video camera not correctly
oriented. • Turn video camera
so that the video image
corresponds to main
observer's viewing
direction.
Focused video image on
monitor, but unfocused
image in surgical
microscope
Setting of diopter rings on
eyepieces has been changed. • Set diopter rings to zero
or to the correct value. Page 74