Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 128 / 268

Device overview S7 / OPMI PROergo
Version 11.0
Page 128 G-30-1435-en
The default setting for Standard User is the large ROI. You can change the size
of the ROI, but the change cannot be saved for the Standard User.
For specific users, the ROI size can be set and saved for each user as required.
Submenu "AF - ROI Position"
This submenu permits you to define the ROI position within the microscope's
field of view.
When you start your system, the ROI is always positioned at the center of the
field of view. The ROI is visualized as a square in the graphic display. Use the
arrow buttons to shift the ROI.
Press the OK button to return to the Autofocus menu. If you do not press any
of the buttons, the display will automatically jump back to the Surgery menu
after approx. 20 seconds.
Menu item "Brake Automatic, on/off"
This function permits you to activate or deactivate the automatic start of the
focusing process.
For repositioning the OPMI PROergo, you have to unlock its magnetic brakes.
Press the release button for the magnetic brakes on one of the handgrips. The
magnetic brakes of the microscope are unlocked for as long as you press one
of these release buttons.
If you have selected "Brake Automatic, on", focusing by the SpeedFokus
(autofocus) option will start automatically as soon as the magnetic brakes
have been locked, i.e. as soon as you let go of the release buttons.
If you have selected "Brake Automatic, off", focusing by the SpeedFokus
(autofocus) option will not start automatically when the magnetic brakes
are locked, i.e. when you let go of the release buttons. You can trigger the
focusing process using the handgrips or the foot control panel. This is only
possible if the Autofocus option has been selected in the handgrip menu
or foot control menu (for foot control panels with 8 or 14 functions).
You can stop focusing by the SpeedFokus (autofocus) option by pressing one
of the release buttons on the handgrips or on the foot control panel (with 8
or 14 functions) during the focusing process.
Menu item "Camera Position"
If you are using an external video camera, the orientation of the video camera
must be known to the video autofocus.
This function is only available in systems equipped with an external video
camera.
The video image must have the same orientation as the image in the main
eyepieces of the surgical microscope.
In addition, the video autofocus needs the information whether the video
camera is connected on the left or right, i.e. whether the beam splitter