Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 120 / 268

Device overview S7 / OPMI PROergo
Version 11.0
Page 120 G-30-1435-en
Surgery menu
The Surgery menu is constantly displayed during operation. The menu
includes the icons (from left to right) for the following menus: Zoom, Focus,
Illumination. Below: User, Options, Video and Balance. The displays below the
zoom, focus, illumination and user icons show the current settings for total
magnification, working distance, brightness level and selected User.
– The display shows the name of the user or application shortened to
10 characters.
– The displayed values are rounded. which are only provided for
information, not for measurement purposes.
Use the control buttons to activate the appropriate selection field and press
the enter button to go to the desired menu.
Zoom menu
You can adjust the settings for the following functions in the Zoom menu:
Speed:
The zoom speed from minimum to maximum speed from 5% to 100% in
increments of 5%.
Start at:
the zoom start value. Enter the magnification factor at which the zoom system
should start when the system is switched on or is switched to a different user.
The magnification factor can be set and saved within a range between
γ = 0.4 x and γ = 2.4 x in increments of 0.1.
γ
is only the magnification factor of the zoom system. The total magnification
provided by the system is also determined by the eyepieces and the working
distance used.
• Activate the function desired (Speed or Start at) and move the indicator
bar using one of the arrow buttons (
, ), until the reading required is
displayed in the field at the top.
• Press the Enter button to save the value set and to return to the Surgery
menu. If you do not press any key, the display will automatically jump back
to the Surgery menu after approx. 30 seconds.
In the Standard User profile, all "Start at" fields are deactivated. No bar is
displayed; it is not possible to adjust any settings.
Standard
300 mm 20 % 4.9 x
1.4 50 %