Zeiss OPMI PROergo S7, Инструкция по эксплуатации, Страница: 2 / 268

S7 / OPMI PROergo
Version 11.0
Page 2 G-30-1435-en
About This Manual These Instructions for Use are part of the delivery scope.
• Please read them carefully before using the device.
• Keep them at the site of use of the device.
• Store them for the entire service life of the device.
• Pass them on to any subsequent owner or user of the device.
Help with orientation – At the beginning of these Instructions for Use there is a summary of the
different sections; this provides an overview of all the topics.
– The contents of each chapter are specified in detail at the beginning of
each chapter.
– The index facilitates searching via keywords.
Scope The following Instructions for Use apply to OPMI PROergo with the following
suspension systems and identifications:
– S7 floor stand, reference number: 000000-1087-851
– S7 ceiling mount, rigid, reference number: 000000-1103-022
– S7 ceiling mount with lifting column, reference number: 000000-1226-405
– S7 wall mount with short arm, reference number: 000000-1193-109
– S7 wall mount with long arm, reference number: 000000-1254-579
– S7 Centro suspension system, reference number: 000000-1254-580
Trademarks OPMI und PROergo is a trademark/are trademarks or registered trademark(s)
of Carl Zeiss Meditec AG or other companies of the ZEISS Group in Germany
and/or other countries.
Manufacturer's details
Subject to changes in design and scope of delivery, as well as ongoing
technical development. Printed in Germany.
Copyright © Carl Zeiss Meditec AG 2018
All rights reserved. Reprints and reproductions, in whole or in part, are
prohibited. However, these Instructions for Use may be digitized and archived
for internal use. Access to this data by third parties is not permissible and must
Carl Zeiss Meditec AG
Goeschwitzer Strasse 51-52
07745 Jena
Germany
Fax: + 49 (0) 7364 - 20 4823
Email: info.meditec@zeiss.com
Internet: www.zeiss.com/med