Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 144 / 268

Preparations for use S7 / OPMI PROergo
Version 11.0
Page 144 G-30-1435-en
Connections, establishing
Connecting the strain relief
You can secure the power plug and the multipoint connector of the switching
component against inadvertent loosening by installing the two cables in strain
relief device (1).
After you have mounted strain relief device (1), the cable must have the
following length:
– 320 mm from the strain relief device up to and including power
connector (9).
– 320 mm from the strain relief device up to connector (10) of the foot
control panel.
• Form a loop with the cable (3).
• Open flap (4).
• Feed the cable through the opening (5).
• Close the flap (6).
• Tighten the cable until it encloses the flap (7).
• Check the cable length.
1