Zeiss OPMI Lumera i, Инструкция по эксплуатации

Страница: 69 / 184

Version 8.0
G-30-1720-en
Page 69
OPMI Lumera i Preparation for use
Mounting accessories on
the video objective lens
The stereo co-observation tube shown in the illustration below is an example
of accessories that can be mounted on the VOL 442 video objective lens.
The procedure described here can also be used for other accessories
(e.g., camera adapter).
• Loosen knurled ring (1) on the video objective lens.
An arrow with the labeling “open” is located on the shaft next to knurled
ring (1).
• Remove dust cover (2) and store it in a safe place.
• Insert accessory module (3) in the opening of the video objective lens.
Make sure that the locating blocks fit in the corresponding grooves of
accessory module (3).
• Screw knurled ring (1) onto accessory module (3).
• Firmly tighten knurled ring (1).
Fig. 23: Mounting accessories
on VOL 442
2
1
3