Zeiss OPMI Lumera i, Инструкция по эксплуатации

Страница: 48 / 184

Device overview OPMI Lumera i
Version 8.0
Page 48 G-30-1720-en
Connector panel on the floor stand
1 Strain relief
for securing power cord and video connection cable.
2 Potential equalization connector
3 Foot control panel connector
4 Remote connector
for controlling external devices with a maximum breaking capacity of
24 V/0.5 A.
5 USB connector (for service purposes only)
for exporting error messages for ZEISS Service.
6 Ethernet connection (optional)
for future linking of OPMI Lumera i and CALLISTO eye.
You can find the requirements for integrating the device into an existing
IT network (as defined by IEC 60601-1) on Page 151.
.
7 Indicator window and sliding switch for rated voltage
The rated voltage displayed here must match the rated voltage of the
power grid available at the installation site. You can adjust the sliding
switch using a suitable tool.
8 Power inlet socket
CAUTION Connection to data networks!
Use the LAN port only in combination with “galvanic network isolation for
medical electrical equipment and systems” in accordance with IEC 60601-1.
The data network connector must be adequately contact-protected, for example,
made of plastic material, at the cable end to the separator (network side).
The cables and connectors of the network connection must at least comply
with Cat-5e EIA/TIA-568A-5, i.e., the more recent Class D values from ISO
11801:2002 or EN 50173-I:2002.
NOTE Damage resulting from connecting the device to an external network.
Connecting the device to external storage devices or networks may permit
viruses to be transferred to the device or may grant viruses unauthorized
access to the system.
• Protect the network by using suitable safeguards (e.g., firewalls) against
unauthorized access. The operator is responsible for security.