Zeiss 000000-1080-349, Инструкция по эксплуатации

Страница: 212 / 278

What to do in the event of malfunctions S100 / OPMI pico
Version 7.0
Page 212 G-30-1781-en
Lamp in light source remains
dark and fan is running Knob for brightness control
set to left-hand stop. Turn knob clockwise. Page 70
Inclination switch deacti-
vated. Move suspension arm of sur-
gical microscope down from
its standby position. –
Inclination switch out of ad-
justment or defective Contact service. –
Lamp module has no contact. Insert lamp module to the
stop.
–
For halogen light source:
Defective halogen lamp. Switch to backup lamp. Page 224
For halogen light source:
Ceramic base does not have
proper contact with halogen
lamp. Plug ceramic base firmly onto
contacts of halogen lamp. Page 224
For xenon light sources:
Defective xenon lamp. Switch to backup lamp. Page 218
For LED light source:
Defective LED light source. Contact service. –
Defective stand electronics. Illuminate surgical area with
an OR luminaire.
Contact service.
–
Lamp goes constantly off and
on again during operation. Ventilation openings are cov-
ered or dirty. Ventilation openings must be
clear; clean them if necessary. –
Defective fan. Illuminate surgical area with
an OR luminaire. Contact
service. –
Failure of suspension elec-
tronics. Illuminate surgical area with
an OR luminaire. Contact
service. –
Defective magnification
changer. - Contact service. –
Filters in illumination beam
path are defective or cannot
be exchanged. - Contact service. –
Problem Possible cause Remedy Cross-
reference